Description
IronBull’s DWB dump trailer brings 8” monoframe I-beam construction into the fold, making the unit 2” shorter than their standard DTB. The model includes 7-gauge floors, 24" 10-gauge sides with 7 machined brakes that will not bend, bow, or buckle even under the most demanding conditions. A supersized locking front toolbox with a divider ensures ample storage that will not interfere with your pump or battery. The front is capped off with a reinforced 2 5/16” coupler and standard 10k jack. A three-way gate will ensure maximum flexibility for transport and dumping, while the standard tarp will make sure your loads make it to their destination. D-rings, Y-hooks, and stake pockets are also thrown in for multiple tie-down options.
This model also comes equipped with slide-in ramps, Dexter Nev-R-Adjust brake axles, radial tires, and a 5-amp wall charger. 5/16 cylinder scissor hoists give you maximum lift power. All lights are sealed lifetime LEDs, and all trailers are equipped with sealed wire harnesses. These units are also backed by IB’s IronClad warranty which covers every unit with a three-year structural, two year component warranty, and two years free roadside assistance. So, grab a bull by the horns and hook up to a DWB today.
Trying to decide between a DTB and DWB? The DWB has an 8" I-Frame and traditional crossmembers. The DTB has a 12" frame and full-length bed runners. Here is a quick introduction on the differences :
Deck Height: 31"
• Sides: 24"
• Frame: 8" I-Beam frame and tongue (10#/ft)
• 2 5/16" Adjustable Coupler
• Formed 3 x 3/16" Channel Crossmembers
• Full Length Bed Runners and Ramp Pockets
• Weld On Diamond Plate Fenders
• Locking Pump Box
• 10K# Drop-Leg Jack
• Cambered Dexter Nevr-R-Adjust Brake Axles
• Multi-leaf Slipper Spring Suspension
• E-Z Lube Hubs
• Radial Tires
• Standard Stake Pockets
• Spare Tire Mount (Weld On)
• Three-Way Gate
• Powdura Powder Coat
• 4 Standard 3" D-Rings
• Flow Control Valve
• Lifetime LED Lighting, DOT Approved
• Double Acting Power Unit
• Single Push Hydraulic Cylinder
• Standard Retractable Tarp Kit
• Molded Sealed Harness with Resistors
• LED Voltage Indicater in Remote
• Built-In 5 amp Battery Charger
• Interstate Deep Cycle Batteries
• 7-Way Receiver Female Plug with Adapter
Manufacturer: Iron Bull |
Category: Dump - Bumper Pull |
GVWR: 14,000 pounds |
Weight: 5,075 pounds |
Payload: 8,925 pounds |
Volume: 7 cubic yards |
VIN: 50HDB1424N1085647 |